Pool Fence Regulation

Key pool fence measurements

In NSW, a pool fence must:

be at least 1.2m high (as measured from the finished ground level)

not leave a gap at the bottom bigger than 10cm from the finished ground level

if a boundary fence is part of the pool fence, the barrier must be 1.8m high

not have gaps of more than 10cm between any vertical bars in the fence

if containing horizontal climbable bars, have these spaced at least 90cm apart

perforated or mesh barriers must have holes no greater than 13mm for fence heights of 1.2m

perforated or mesh barriers of 1.8m height with holes greater than 13mm must not exceed 100mm

The pool fence must be well maintained and in good working order

Go to the Local Government Pool Safety Booklet for diagrams showing these measurements and other NSW pool safety criteria.

Non-climbable zone

To prevent children climbing over fencing into the pool area, the laws require pool owners to make sure they maintain a ‘non-climbable zone’ around the pool.

any trees, shrubs or any other objects such as a barbeque, pot plants, toys, ladders and chairs must not be within the 90cm non climbable zone.

this zone is measured in an arc shape from the top of the pool fence arching towards the ground.

it also includes the space extending 30cm inside the pool area – this space should also be cleared of any potential footholds or handholds.

any horizontal climbable bars on the pool fence must also be spaced AT LEAST 90cm apart.

If your pool area does not meet these requirements, you can contact a licensed builder, pool technician or fencing contractor to carry out work in line with these safety requirements.

Child-resistant doors and windows

Older swimming pools might include doors or windows as part of the pool fence or barrier. This is no longer allowed.

Doors in pool barriers

If you have a door that forms part of a pool barrier you must make sure that:

it self closes without the application of manual force

it self latches and requires manual release

the latching device is at least 150cm off the ground

it has a non climbable zone of 90cm that is at least 120cm above the floor

it does not open towards the pool

it does not have any pet doors.

Windows in pool barriers

If you have windows that form part of a pool barrier, they must have:

a locking device or a security screen fixed to the building that prevents them from opening more than 10cm.

If it does not satisfy this requirement, you will need to install a locking device or security screen that reduces the gap to 10cm or less.

Gate closing and latching devices

Check to ensure that your pool gate:

is never propped open and is always kept shut

swings outwards (away from the pool area). If it does not swing outwards, the gate must be re-hung so that it does.

shuts automatically from any open position, without having to forcibly close it.

automatically locks (self-latches) when it closes.

If the gate does not shut and lock automatically, the pool gate should be permanently fastened until a new lock and closing device can be installed. Self-closing and self-latching devices can be purchased from most pool and hardware shops and can be easily installed.

Signage

Appropriate and clear warning signs must be attached to the pool fence and gate

In case of an emergency the law requires that you have a cardiopulmonary resuscitation (CPR) sign displayed near your pool. The sign must be in good condition and able to be read easily from 3 metres.

You can buy a CPR sign from your local pool shop, council or community organisations such as St John Ambulance, the Australian Red Cross or Royal Life Saving.

Pool fence and gate maintenance

All fence bolts, screws and fasteners must be tight and in good order. Any loose bolts, screws and fasteners should be tightened or replaced. Self-closing gate hinges, locks and latches should be sprayed with lubricating oil or silicone.

Manufacturers of the pool fence and gate should provide written instructions on how to maintain your pool fence and gate. This may include the regular replacement of springs and regular spraying of self-closing gate hinges, locks and latches with lubricating oil or silicone. Proper maintenance can help to prevent many of the faults relating to self-closing and self-latching gates.

Compliance with the Building Code of Australia

Swimming pool barriers are required to meet performance requirements set out in the Building Code of Australia (BCA). From 1 September 2018 these requirements can be met using either a performance solution or a deemed-to-satisfy (DTS) solution.

A deemed-to-satisfy solution follows a set recipe of what, when and how to do something. It uses the DTS solutions from the BCA, which include materials, components, design factors, and construction methods that, if used, are deemed to meet the performance requirements.

A performance solution on the other hand is unique for an individual situation. These solutions are often flexible in achieving the outcomes and encourage innovative design and technology use.